WebSVN – Games.Prince of Persia – Diff – //SDL2_image.framework/Frameworks/webp.framework/Headers/webp/encode.h

 typedef struct WebPAuxStats WebPAuxStats;
 typedef struct WebPMemoryWriter WebPMemoryWriter;
 // Return the encoder's version number, packed in hexadecimal using 8bits for
 // each of major/minor/revision. E.g: v2.5.7 is 0x020507.
-WEBP_EXTERN(int) WebPGetEncoderVersion(void);
+WEBP_EXTERN int WebPGetEncoderVersion(void);
 //------------------------------------------------------------------------------
 // One-stop-shop call! No questions asked:
 // Returns the size of the compressed data (pointed to by *output), or 0 if
 // an error occurred. The compressed data must be released by the caller
 // using the call 'WebPFree(*output)'.
 // These functions compress using the lossy format, and the quality_factor
 // can go from 0 (smaller output, lower quality) to 100 (best quality,
 // larger output).
-WEBP_EXTERN(size_t) WebPEncodeRGB(const uint8_t* rgb,
+WEBP_EXTERN size_t WebPEncodeRGB(const uint8_t* rgb,
+                                 int width, int height, int stride,
+                                 float quality_factor, uint8_t** output);
+WEBP_EXTERN size_t WebPEncodeBGR(const uint8_t* bgr,
+                                 int width, int height, int stride,
+                                 float quality_factor, uint8_t** output);
+WEBP_EXTERN size_t WebPEncodeRGBA(const uint8_t* rgba,
                                   int width, int height, int stride,
                                   float quality_factor, uint8_t** output);
-WEBP_EXTERN(size_t) WebPEncodeBGR(const uint8_t* bgr,
+WEBP_EXTERN size_t WebPEncodeBGRA(const uint8_t* bgra,
                                   int width, int height, int stride,
                                   float quality_factor, uint8_t** output);
-WEBP_EXTERN(size_t) WebPEncodeRGBA(const uint8_t* rgba,
-                                   int width, int height, int stride,
-                                   float quality_factor, uint8_t** output);
-WEBP_EXTERN(size_t) WebPEncodeBGRA(const uint8_t* bgra,
-                                   int width, int height, int stride,
-                                   float quality_factor, uint8_t** output);
 // These functions are the equivalent of the above, but compressing in a
 // lossless manner. Files are usually larger than lossy format, but will
 // not suffer any compression loss.
-WEBP_EXTERN(size_t) WebPEncodeLosslessRGB(const uint8_t* rgb,
+WEBP_EXTERN size_t WebPEncodeLosslessRGB(const uint8_t* rgb,
+                                         int width, int height, int stride,
+                                         uint8_t** output);
+WEBP_EXTERN size_t WebPEncodeLosslessBGR(const uint8_t* bgr,
+                                         int width, int height, int stride,
+                                         uint8_t** output);
+WEBP_EXTERN size_t WebPEncodeLosslessRGBA(const uint8_t* rgba,
                                           int width, int height, int stride,
                                           uint8_t** output);
-WEBP_EXTERN(size_t) WebPEncodeLosslessBGR(const uint8_t* bgr,
+WEBP_EXTERN size_t WebPEncodeLosslessBGRA(const uint8_t* bgra,
                                           int width, int height, int stride,
                                           uint8_t** output);
-WEBP_EXTERN(size_t) WebPEncodeLosslessRGBA(const uint8_t* rgba,
-                                           int width, int height, int stride,
-                                           uint8_t** output);
-WEBP_EXTERN(size_t) WebPEncodeLosslessBGRA(const uint8_t* bgra,
-                                           int width, int height, int stride,
-                                           uint8_t** output);
 // Releases memory returned by the WebPEncode*() functions above.
-WEBP_EXTERN(void) WebPFree(void* ptr);
+WEBP_EXTERN void WebPFree(void* ptr);
 //------------------------------------------------------------------------------
 // Coding parameters
 // Image characteristics hint for the underlying encoder.
 } WebPImageHint;
 // Compression parameters.
 struct WebPConfig {
   int lossless;           // Lossless encoding (0=lossy(default), 1=lossless).
-  float quality;          // between 0 (smallest file) and 100 (biggest)
+  float quality;          // between 0 and 100. For lossy, 0 gives the smallest
+                          // size and 100 the largest. For lossless, this
+                          // parameter is the amount of effort put into the
+                          // compression: 0 is the fastest but gives larger
+                          // files compared to the slowest, but best, 100.
   int method;             // quality/speed trade-off (0=fast, 6=slower-better)
   WebPImageHint image_hint;  // Hint for image type (lossless only for now).
-  // Parameters related to lossy compression only:
   int target_size;        // if non-zero, set the desired target size in bytes.
                           // Takes precedence over the 'compression' parameter.
   float target_PSNR;      // if non-zero, specifies the minimal distortion to
                           // try to achieve. Takes precedence over target_size.
   int segments;           // maximum number of segments to use, in [1..4]
   WEBP_PRESET_ICON,         // small-sized colorful images
   WEBP_PRESET_TEXT          // text-like
 } WebPPreset;
 // Internal, version-checked, entry point
-WEBP_EXTERN(int) WebPConfigInitInternal(WebPConfig*, WebPPreset, float, int);
+WEBP_EXTERN int WebPConfigInitInternal(WebPConfig*, WebPPreset, float, int);
 // Should always be called, to initialize a fresh WebPConfig structure before
 // modification. Returns false in case of version mismatch. WebPConfigInit()
 // must have succeeded before using the 'config' object.
 // Note that the default values are lossless=0 and quality=75.
 // between 0 (fastest, lowest compression) and 9 (slower, best compression).
 // A good default level is '6', providing a fair tradeoff between compression
 // speed and final compressed size.
 // This function will overwrite several fields from config: 'method', 'quality'
 // and 'lossless'. Returns false in case of parameter error.
-WEBP_EXTERN(int) WebPConfigLosslessPreset(WebPConfig* config, int level);
+WEBP_EXTERN int WebPConfigLosslessPreset(WebPConfig* config, int level);
 // Returns true if 'config' is non-NULL and all configuration parameters are
 // within their valid ranges.
-WEBP_EXTERN(int) WebPValidateConfig(const WebPConfig* config);
+WEBP_EXTERN int WebPValidateConfig(const WebPConfig* config);
 //------------------------------------------------------------------------------
 // Input / Output
-// Structure for storing auxiliary statistics (mostly for lossy encoding).
+// Structure for storing auxiliary statistics.
 struct WebPAuxStats {
   int coded_size;         // final size
   float PSNR[5];          // peak-signal-to-noise ratio for Y/U/V/All/Alpha
   size_t   max_size;  // total capacity
   uint32_t pad[1];    // padding for later use
 };
 // The following must be called first before any use.
-WEBP_EXTERN(void) WebPMemoryWriterInit(WebPMemoryWriter* writer);
+WEBP_EXTERN void WebPMemoryWriterInit(WebPMemoryWriter* writer);
 // The following must be called to deallocate writer->mem memory. The 'writer'
 // object itself is not deallocated.
-WEBP_EXTERN(void) WebPMemoryWriterClear(WebPMemoryWriter* writer);
+WEBP_EXTERN void WebPMemoryWriterClear(WebPMemoryWriter* writer);
 // The custom writer to be used with WebPMemoryWriter as custom_ptr. Upon
 // completion, writer.mem and writer.size will hold the coded data.
 // writer.mem must be freed by calling WebPMemoryWriterClear.
-WEBP_EXTERN(int) WebPMemoryWrite(const uint8_t* data, size_t data_size,
+WEBP_EXTERN int WebPMemoryWrite(const uint8_t* data, size_t data_size,
-                                 const WebPPicture* picture);
+                                const WebPPicture* picture);
 // Progress hook, called from time to time to report progress. It can return
 // false to request an abort of the encoding process, or true otherwise if
 // everything is OK.
 typedef int (*WebPProgressHook)(int percent, const WebPPicture* picture);
   void* memory_argb_;     // and for argb too.
   void* pad7[2];          // padding for later use
 };
 // Internal, version-checked, entry point
-WEBP_EXTERN(int) WebPPictureInitInternal(WebPPicture*, int);
+WEBP_EXTERN int WebPPictureInitInternal(WebPPicture*, int);
 // Should always be called, to initialize the structure. Returns false in case
 // of version mismatch. WebPPictureInit() must have succeeded before using the
 // 'picture' object.
 // Note that, by default, use_argb is false and colorspace is WEBP_YUV420.
 // Convenience allocation / deallocation based on picture->width/height:
 // Allocate y/u/v buffers as per colorspace/width/height specification.
 // Note! This function will free the previous buffer if needed.
 // Returns false in case of memory error.
-WEBP_EXTERN(int) WebPPictureAlloc(WebPPicture* picture);
+WEBP_EXTERN int WebPPictureAlloc(WebPPicture* picture);
 // Release the memory allocated by WebPPictureAlloc() or WebPPictureImport*().
 // Note that this function does _not_ free the memory used by the 'picture'
 // object itself.
 // Besides memory (which is reclaimed) all other fields of 'picture' are
 // preserved.
-WEBP_EXTERN(void) WebPPictureFree(WebPPicture* picture);
+WEBP_EXTERN void WebPPictureFree(WebPPicture* picture);
 // Copy the pixels of *src into *dst, using WebPPictureAlloc. Upon return, *dst
 // will fully own the copied pixels (this is not a view). The 'dst' picture need
 // not be initialized as its content is overwritten.
 // Returns false in case of memory allocation error.
-WEBP_EXTERN(int) WebPPictureCopy(const WebPPicture* src, WebPPicture* dst);
+WEBP_EXTERN int WebPPictureCopy(const WebPPicture* src, WebPPicture* dst);
 // Compute the single distortion for packed planes of samples.
 // 'src' will be compared to 'ref', and the raw distortion stored into
 // '*distortion'. The refined metric (log(MSE), log(1 - ssim),...' will be
 // stored in '*result'.
 // 'x_step' is the horizontal stride (in bytes) between samples.
 // 'src/ref_stride' is the byte distance between rows.
 // Returns false in case of error (bad parameter, memory allocation error, ...).
-WEBP_EXTERN(int) WebPPlaneDistortion(const uint8_t* src, size_t src_stride,
+WEBP_EXTERN int WebPPlaneDistortion(const uint8_t* src, size_t src_stride,
-                                     const uint8_t* ref, size_t ref_stride,
+                                    const uint8_t* ref, size_t ref_stride,
-                                     int width, int height,
+                                    int width, int height,
-                                     size_t x_step,
+                                    size_t x_step,
-                                     int type,   // 0 = PSNR, 1 = SSIM, 2 = LSIM
+                                    int type,   // 0 = PSNR, 1 = SSIM, 2 = LSIM
-                                     float* distortion, float* result);
+                                    float* distortion, float* result);
 // Compute PSNR, SSIM or LSIM distortion metric between two pictures. Results
 // are in dB, stored in result[] in the B/G/R/A/All order. The distortion is
 // always performed using ARGB samples. Hence if the input is YUV(A), the
 // picture will be internally converted to ARGB (just for the measurement).
 // Warning: this function is rather CPU-intensive.
-WEBP_EXTERN(int) WebPPictureDistortion(
+WEBP_EXTERN int WebPPictureDistortion(
     const WebPPicture* src, const WebPPicture* ref,
     int metric_type,           // 0 = PSNR, 1 = SSIM, 2 = LSIM
     float result[5]);
 // self-crops a picture to the rectangle defined by top/left/width/height.
 // The rectangle for the view is defined by the top-left corner pixel
 // coordinates (left, top) as well as its width and height. This rectangle
 // must be fully be comprised inside the 'src' source picture. If the source
 // picture uses the YUV420 colorspace, the top and left coordinates will be
 // snapped to even values.
-WEBP_EXTERN(int) WebPPictureCrop(WebPPicture* picture,
+WEBP_EXTERN int WebPPictureCrop(WebPPicture* picture,
-                                 int left, int top, int width, int height);
+                                int left, int top, int width, int height);
 // Extracts a view from 'src' picture into 'dst'. The rectangle for the view
 // is defined by the top-left corner pixel coordinates (left, top) as well
 // as its width and height. This rectangle must be fully be comprised inside
 // the 'src' source picture. If the source picture uses the YUV420 colorspace,
 // ('src' equal to 'dst') as a mean of fast-cropping (but note that doing so,
 // the original dimension will be lost). Picture 'dst' need not be initialized
 // with WebPPictureInit() if it is different from 'src', since its content will
 // be overwritten.
 // Returns false in case of memory allocation error or invalid parameters.
-WEBP_EXTERN(int) WebPPictureView(const WebPPicture* src,
+WEBP_EXTERN int WebPPictureView(const WebPPicture* src,
-                                 int left, int top, int width, int height,
+                                int left, int top, int width, int height,
-                                 WebPPicture* dst);
+                                WebPPicture* dst);
 // Returns true if the 'picture' is actually a view and therefore does
 // not own the memory for pixels.
-WEBP_EXTERN(int) WebPPictureIsView(const WebPPicture* picture);
+WEBP_EXTERN int WebPPictureIsView(const WebPPicture* picture);
 // Rescale a picture to new dimension width x height.
 // If either 'width' or 'height' (but not both) is 0 the corresponding
 // dimension will be calculated preserving the aspect ratio.
 // No gamma correction is applied.
 // Returns false in case of error (invalid parameter or insufficient memory).
-WEBP_EXTERN(int) WebPPictureRescale(WebPPicture* pic, int width, int height);
+WEBP_EXTERN int WebPPictureRescale(WebPPicture* pic, int width, int height);
 // Colorspace conversion function to import RGB samples.
 // Previous buffer will be free'd, if any.
 // *rgb buffer should have a size of at least height * rgb_stride.
 // Returns false in case of memory error.
-WEBP_EXTERN(int) WebPPictureImportRGB(
+WEBP_EXTERN int WebPPictureImportRGB(
     WebPPicture* picture, const uint8_t* rgb, int rgb_stride);
 // Same, but for RGBA buffer.
-WEBP_EXTERN(int) WebPPictureImportRGBA(
+WEBP_EXTERN int WebPPictureImportRGBA(
     WebPPicture* picture, const uint8_t* rgba, int rgba_stride);
 // Same, but for RGBA buffer. Imports the RGB direct from the 32-bit format
 // input buffer ignoring the alpha channel. Avoids needing to copy the data
 // to a temporary 24-bit RGB buffer to import the RGB only.
-WEBP_EXTERN(int) WebPPictureImportRGBX(
+WEBP_EXTERN int WebPPictureImportRGBX(
     WebPPicture* picture, const uint8_t* rgbx, int rgbx_stride);
 // Variants of the above, but taking BGR(A|X) input.
-WEBP_EXTERN(int) WebPPictureImportBGR(
+WEBP_EXTERN int WebPPictureImportBGR(
     WebPPicture* picture, const uint8_t* bgr, int bgr_stride);
-WEBP_EXTERN(int) WebPPictureImportBGRA(
+WEBP_EXTERN int WebPPictureImportBGRA(
     WebPPicture* picture, const uint8_t* bgra, int bgra_stride);
-WEBP_EXTERN(int) WebPPictureImportBGRX(
+WEBP_EXTERN int WebPPictureImportBGRX(
     WebPPicture* picture, const uint8_t* bgrx, int bgrx_stride);
 // Converts picture->argb data to the YUV420A format. The 'colorspace'
 // parameter is deprecated and should be equal to WEBP_YUV420.
 // Upon return, picture->use_argb is set to false. The presence of real
 // non-opaque transparent values is detected, and 'colorspace' will be
 // adjusted accordingly. Note that this method is lossy.
 // Returns false in case of error.
-WEBP_EXTERN(int) WebPPictureARGBToYUVA(WebPPicture* picture,
+WEBP_EXTERN int WebPPictureARGBToYUVA(WebPPicture* picture,
-                                       WebPEncCSP /*colorspace = WEBP_YUV420*/);
+                                      WebPEncCSP /*colorspace = WEBP_YUV420*/);
 // Same as WebPPictureARGBToYUVA(), but the conversion is done using
 // pseudo-random dithering with a strength 'dithering' between
 // 0.0 (no dithering) and 1.0 (maximum dithering). This is useful
 // for photographic picture.
-WEBP_EXTERN(int) WebPPictureARGBToYUVADithered(
+WEBP_EXTERN int WebPPictureARGBToYUVADithered(
     WebPPicture* picture, WebPEncCSP colorspace, float dithering);
 // Performs 'sharp' RGBA->YUVA420 downsampling and colorspace conversion.
 // Downsampling is handled with extra care in case of color clipping. This
 // method is roughly 2x slower than WebPPictureARGBToYUVA() but produces better
 // and sharper YUV representation.
 // Returns false in case of error.
-WEBP_EXTERN(int) WebPPictureSharpARGBToYUVA(WebPPicture* picture);
+WEBP_EXTERN int WebPPictureSharpARGBToYUVA(WebPPicture* picture);
 // kept for backward compatibility:
-WEBP_EXTERN(int) WebPPictureSmartARGBToYUVA(WebPPicture* picture);
+WEBP_EXTERN int WebPPictureSmartARGBToYUVA(WebPPicture* picture);
 // Converts picture->yuv to picture->argb and sets picture->use_argb to true.
 // The input format must be YUV_420 or YUV_420A. The conversion from YUV420 to
 // ARGB incurs a small loss too.
 // Note that the use of this colorspace is discouraged if one has access to the
 // raw ARGB samples, since using YUV420 is comparatively lossy.
 // Returns false in case of error.
-WEBP_EXTERN(int) WebPPictureYUVAToARGB(WebPPicture* picture);
+WEBP_EXTERN int WebPPictureYUVAToARGB(WebPPicture* picture);
 // Helper function: given a width x height plane of RGBA or YUV(A) samples
-// clean-up the YUV or RGB samples under fully transparent area, to help
+// clean-up or smoothen the YUV or RGB samples under fully transparent area,
-// compressibility (no guarantee, though).
+// to help compressibility (no guarantee, though).
-WEBP_EXTERN(void) WebPCleanupTransparentArea(WebPPicture* picture);
+WEBP_EXTERN void WebPCleanupTransparentArea(WebPPicture* picture);
 // Scan the picture 'picture' for the presence of non fully opaque alpha values.
 // Returns true in such case. Otherwise returns false (indicating that the
 // alpha plane can be ignored altogether e.g.).
-WEBP_EXTERN(int) WebPPictureHasTransparency(const WebPPicture* picture);
+WEBP_EXTERN int WebPPictureHasTransparency(const WebPPicture* picture);
 // Remove the transparency information (if present) by blending the color with
 // the background color 'background_rgb' (specified as 24bit RGB triplet).
 // After this call, all alpha values are reset to 0xff.
-WEBP_EXTERN(void) WebPBlendAlpha(WebPPicture* pic, uint32_t background_rgb);
+WEBP_EXTERN void WebPBlendAlpha(WebPPicture* pic, uint32_t background_rgb);
 //------------------------------------------------------------------------------
 // Main call
 // Main encoding call, after config and picture have been initialized.
 // 'picture' can hold the source samples in both YUV(A) or ARGB input, depending
 // on the value of 'picture->use_argb'. It is highly recommended to use
 // the former for lossy encoding, and the latter for lossless encoding
 // (when config.lossless is true). Automatic conversion from one format to
 // another is provided but they both incur some loss.
-WEBP_EXTERN(int) WebPEncode(const WebPConfig* config, WebPPicture* picture);
+WEBP_EXTERN int WebPEncode(const WebPConfig* config, WebPPicture* picture);
 //------------------------------------------------------------------------------
 #ifdef __cplusplus
 }    // extern "C"

Subversion Repositories Games.Prince of Persia

Games.Prince of Persia//SDL2_image.framework/Frameworks/webp.framework/Headers/webp/encode.h – Rev 1 → 8